| |
The Todd-AO Process
An Examination of the Type of Equipment That is Needed to
Film and Project this New Super Wide Screen Process |
Read more at
in70mm.com The 70mm Newsletter
|
Written by: American Optical Company / The Todd-AO Corporation. Printed in Theatre Catalog
1955-56, and prepared for in70mm.com by Anders M. Olsson, Lund, Sweden |
Date:
02.11.2012 |
AN
ARTIST'S conception of the Rivoli's Todd-AO installation. Booth (A) is
normally used, but booth (B) was installed in the mezzanine to demonstrate
flexibility of projector as to degree of projection angle.
One of the more recent of
the super wide screen processes is Todd-AO. This system was given a
tremendous boost when it was selected by the famed Broadway team of Rodgers
and Hammerstein for the film production of their world famed musical,
"Oklahoma!".
Result of Research
The Todd-AO
process is the ultimate result of intensive research by a
team of research and engineering scientists headed by
Brian O'Brien at
the American Optical Company laboratories in Rochester, N. Y. O'Brian
describes the system as "a process of motion picture photography and
projection that establishes the illusion of participation in the action . .
. the feeling of literally being present in the scene."
One camera and one projector are used in the Todd-AO system, and does not
require the three projection booths and three projectors which are required
for the showing of Cinerama which the Todd-AO process is said to most
closely resemble in overall appearance and effect.
|
More in 70mm reading:
in70mm.com's Todd-AO Page
Todd-AO
Birth date
How
Todd-AO Began
Todd-AO
The Show of Shows
Working for Mike
Todd
Walter Siegmund
Interview
DP70 / Universal 70-35 / Norelco AAII
- The Todd-AO Projector
|
Brief
| |
The latest of the super wide screen systems
using over-sized film to be introduced to the public is the Todd-AO process. This article is based on information supplied by the Todd-AO
Corporation and offers the reader some background on the research early experiments and the men responsible for the development and
perfection of this system. In addition there is detailed
information about the various pieces of special equipment that had to be
devised to film and project this 70mm process. Included in this
examination are the camera, the camera lenses, the projector
and its component parts, the design of the curved screen and the
special material required. There is also data on the installation of
this system in theatres.
|
|
Camera
| |
THE
TODD-AO camera was specially designed to handle the 65mm
negative.
A new movie process must have a new camera. The Todd-AO cameras are
precision register-pin movement cameras of surprisingly small size and light
weight. They were designed to take the 65mm Todd-AO negative, but in spite
of the increased width of the negative, the cameras are only slightly wider
and a few pounds heavier than conventional 35mm cameras. The movement is of
a double eccentric and link type and is very quiet running. Special emphasis
has been put on steadiness in the Todd-AO picture, and this steadiness is
achieved first of all in the camera, where special attention has been given
to a rugged but precise film movement.
In addition to running at 30 frames per second, Todd-AO cameras also run at
standard 24 frames per second; a high speed camera is also available; it
will run up to 90 frames per second for special effect photography.
For interior shots where special quietness is necessary, the camera carries
a light fiber-glass, sound-proof blimp and a special "barney" of soft
padding to surround the huge "Bugeye" lens.
|
|
Focus Finder
| |
Each camera is equipped with a new
dual-magnification focus finder as an integral part. Sixteen-power
magnification is available in the center of the field to make possible
unusually precise focusing. In the low magnification position, the focus
finder gives an exceptionally bright, wide view of the entire field on
the ground glass with reticle lines marked for the Todd-AO frame and for
other aspect ratios. This permits the photographer to compose the
picture to take best advantage of the various forms of print-down with
the Todd-AO negative, as well as to compose the primary Todd-AO picture.
|
|
Unique Lenses
| |
The
diagram illustrates the angle of coverage of the four lenses used.
Unlike lenses in 35mm cameras, which vary in focal length, the Todd-AO
lenses are classified according to the angle of coverage.
"Oklahoma!"
was photographed through four new lenses designed especially for the
Todd-AO process. All of these reflect the latest developments in the art
of optical design, but the most impressive is the "Bugeye" lens with a
128 degree horizontal field of view. A camera equipped with this lens
can stand in one corner of a room and photograph all four walls
simultaneously. For the first time, a commercial movie lens is available
whose angular field matches the useful field of the human eye.
Achieving this result was not easy. Professor
R. E. Hopkins of the
Institute of Optics at the University of Rochester, who is a consultant
to American Optical, had already acquired experience in wide-angle
lenses for military training devices when he was faced with the new task
demanded by the Todd-AO process. Fortunately he and his scientific
colleagues at the American Optical Company had already developed
considerable experience in the use of automatic high-speed computing
machines in optical design. With the tools provided by the American
Optical Company electronic computer, they were ready to face the design
of a lens of complexity previously unknown in the industry. "Bugeye"
contains 13 separate glass parts ranging in size up to nine inches in
diameter — big enough for a dinner plate. In addition, it includes
components unique in the industry in having surfaces which are not
spherical. The problem of designing lenses with aspheric surfaces is a
new and challenging one, and the problem of making these surfaces is
equally difficult. War-time experience of the University of Rochester
and the American Optical Company led them to believe that it would be
possible to produce the desired aspherical surfaces, and after much hard
work, they succeeded.
|
|
Balance out errors
| |
The human eye has an unfair advantage over
a movie camera in having a deeply curved film. This is impossible in a
movie camera, and is one of the reasons why the wide-angle lens must be
so much more complex than the lens of the human eye. The necessity of
using flat film presents the very difficult problem of "distortion". One
of the many advantages of the completely integrated Todd-AO system is
that it becomes possible to balance out the errors of one part by the
proper design of another part. Careful design of the cameras, the
printer, and the screen curvature has made it possible to show a picture
essentially free from distortion.
|
|
Wide Film
| |
A
CLIP of the Todd-AO 65mm film is seen next to a strip of standard film for
comparisons.
Todd-AO pictures are
photographed on special 65mm Eastman color negative, and shown on 70mm
Eastman color print. The pictures are not only wider than conventional film,
but are proportionately higher, and a five hole pull-down is used.
The main advantage of the wide film is the excellent sharpness of the
picture on the screen, since less magnification is necessary. Without this
crisp picture, much of the realism of the Todd-AO system would be lost.
Less magnification also means less weave and jitter of the picture, and this
also makes the reality more perfect. Scratches and dirt will also be less
conspicuous when they begin to appear.
|
|
Larger Aperture
| |
Another advantage of the wide film is the
larger aperture in the projector film gate. Conventional projectors
already concentrate so much light on the film during the fraction of a
second that it sits in the film gate, that the life of the film is
endangered. Filling a Todd-AO screen from a 35mm frame could only be
done by limiting the total light drastically and destroying much of the
visual sensation. This problem is solved with the wide film, and an
exceptionally bright picture is possible.
Although the negative is made on 65mm film, and the prints are on 70mm
film, the pictures are the same size. The extra 5mm is to make room for
the six channel magnetic sound whose quality is every bit as sharp and
clear as the pictures themselves.
|
|
High Speed
| |
The pictures are not only wider and bigger in
the Todd-AO system — they come more often at a rate of 30 per second. This
change is necessary because the human eye is very sensitive to movements and
flickers that occur at the edges of the field of view. This sensitivity is
something our ancestors developed to warn themselves of dangers not seen
directly, but it makes us more sensitive to the flicker of a wide movie
screen. The designers of the Todd-AO Process chose 30 frames per second,
thereby permitting a clear bright picture without flicker. As a result of
great feeling of realism is maintained which in turn creates a great
audience participation — which is the hallmark of the Todd-AO process.
|
|
Projector
| |
Seen
here is the all-purpose projector used in Todd-AO. 1. Arclamp; 2.
Projector Head; 3. Upper Magazine; 4. Window; 5. Upper Fire Trap; 6.
CineApergon Objective; 7. Lens Mount Bracket; 8. Upper Motor; 9. Inching
Knob; 10. Belt Housing; 11. Lower Motor; 12. Upper Base; 13. Water Line
Connections; 14. Cutout Electrical Leads; 15. Hold-Down Screws; 16.
Leveling Screws; 17. Lower Base; 18. Arc Lamp Bracket; 19. Arc Lamp Push
Button Switches; 20. Motor Push Button Switches; 21. Lower Fire Trap.
The Todd-AO Projector is a new design specially built for the
Todd-AO system and embodying unusual flexibility to deal with the wide
variety of modern film techniques. The projector will take 70mm film or
35mm film with very minor adjustments in the mechanism, and can be
changed in about four minutes. The projectors are equipped to handle
multichannel magnetic sound for Todd-AO, 35mm magnetic sound for CinemaScope, or conventional optical sound. All three sets of sound
equipment are provided, and the only change necessary is to thread the
film through the desired sound head.
|
|
Unusual Feature
| |
AN
installation diagram of the Todd-AO projector showing layout and space
requirements.
An unusual feature of
the design is that all the mechanism, including sound heads, is included
in the projector head thus eliminating the possibility of errors due to
unequal film pressure. The projector includes a tilting mechanism which
rotates around a high point so that there is only a slight movement of
the center of gravity. Projection angles of as far down as 28 degrees
and as far up as 20 degrees can be reached, so the projector can be used
in upward-throw drive-in theatres.
The projector has many valuable modern features including a centrifugal
switch to drop the dowser if the film speed is too low, a water flow
switch to cut off the arc if the cooling water is cut off, and stop
switches on both sides of the chassis. The built in optical preamplifier
is of a special plug-in design so that a new unit can be substituted
almost instantaneously in case of breakdown. The single-bladed conical
shutter cuts twice for every frame and gives a 54 per cent efficiency.
Two separate motors are provided to run at 30 and 24 frames per second
respectively and to provide quiet operation with a minimum gear
complexity. A constant feed sprocket is provided on the magnetic film
path, between the upper fire rollers and the magnetic 10 channel head;
this sprocket evens out the potential jerkiness in the film as it comes
out from the upper magazine — and as a result insures steady contact at
all times between the film and the magnetic head.
|
|
Rugged Construction
| |
THE
Todd-AO projector can easily be adopted so as to be able to project
CinemaScope prints and standard 35mm prints with parts seen right.
All sprockets and
rollers in the projector head are made of non-magnetic aluminum or nylon
with outstanding wearing abilities. The projector gate is made of
tantung a special metal alloy that has excellent hardness
characteristics to prevent wear and will not become magnetized. As a
result, the recurring problem of degaussing is practically eliminated
with the new Todd-AO projector. The 10 channel magnetic head is used
both for Todd-AO sound and CinemaScope four channel sound.
An additional new feature is that the lower magazine or take-up reel is
driven by a vertical shaft extending from the projector mechanism,
thereby eliminating the usual chain or belt drive.
|
|
Screen
| |
The most striking and significant part of
the Todd-AO system is the deeply curved, concave screen. It is important
to understand the visual significance of this deeply curved screen which
is fundamental to the system and is responsible for many of the
remarkable visual effects which would be impossible without it.
Perhaps the most important visual result from the deeply curved Todd-AO
screen is the distinct sensation of personal participation experienced
by the audience both physically and emotionally.
|
|
No Distortion
| |
Another aspect of the deeply curved screen
is its freedom from distorted images. Most theatre-goers are familiar
with the elongated narrow figures that are seen from the side seats in
the front row. Scientists at the American Optical Company conducted a
series of careful experiments to see what "squeeze" could be tolerated
without objection when looking at the screen from an angle. They then
studied theatres to see how many seats present an objectionably squeezed
picture and which seats give a good picture. The final result is that
the Todd-AO system is a process for every theatre and for every seat in
every theatre.
The ability of the Todd-AO deeply curved screen to avoid "squeeze" is
stolen straight from Euclid's "Geometry", but Euclid never thought of
applying it to a movie screen. Euclid taught that for an observer
standing on the edge of a circle, equal arcs subtend equal angles
anywhere on the circle. On the Todd-AO screen this has the result that
an observer can walk right up and lean his cheek against the screen, and
still get a good view of the picture. For the theatre owner, this is
important because it means that he will be able to make much more
profitable use of the front seats of his theatre than he could with a
flat screen.
|
|
Eliminates Error
| |
The Todd-AO curved screen is satisfying
for another reason. The eyes must be focused and their angle of
convergence must always be adjusted for the distance to the screen. A
large flat screen has portions at widely varying distances from the
audience, and their visual convergence and focus must be constantly
changed. This disturbing error is effectively eliminated when the
Todd-AO screen is used.
When the Todd-AO screen curves deep into the sides of the audience, a
new dimension becomes available which can yield striking realism. Motion
is now possible towards the viewing audience and away from it. A ride
now seems to carry the viewer forward into the scene as the details slip
past him on either side with great realism.
The Todd-AO screen is not only wide and deeply curved, it is
proportionately high. Its balanced (2x1) aspect ratio gives to the movie
director the privilege of composing his scenes in harmonious
proportions.
The sense of motion is tremendously increased because it is not longer
directionally confined to one dimension. One of the scenes from
"Oklahoma!" shows a crowd of people gathering together at a point of
excitement. The interplay of running figures coming down from upper
left, in from the left, down from upper right, and in from right catches
up the spectator in the excitement of the moment, making him feel as if
he were actually participating in the screen action.
|
|
Special Screen Material
| |
The Todd-AO screen introduced two very
distinct problems, namely reillumination and brightness.
If light shining on one part of the screen scatters onto another part,
contrast is reduced, and colors are less bright. Somehow the light had
to be thrown back at the audience and not allowed to flood other parts
of the screen. This was the reillumination problem.
The other problem was simply that of getting enough light. If the same
light as is used in standard 35mm projection is spread over a screen
more than four times larger, it will be only one-fourth as bright. The
Todd-AO system partially overcame this problem by the use of a larger
film, but in addition it was important that the screen act as
efficiently as possible in redirecting the light to the audience and not
wasting any of it lighting up the walls, ceiling, or the other parts of
the screen.
Both of these problems have now been solved by moulding and coating the
surface of the screen so as to make the light go in the desired
direction and no other.
|
|
Plastic Coated
| |
The result is a screen whose surface is
made of plastic-coated cotton cloth. The plastic is deeply embossed with
tiny rectangular mirrors (600 to the square inch) and aluminized to give
high reflectivity. In each portion of the screen the mirrors are at the
correct angle to direct the light where it is needed, and keep it away
from where it is not wanted. The invisible seams are made strong,
smooth, and free of wrinkles with the aid of a fiber-glass tape on the
back. The screen surface conforms with the usual fire regulations and
can be easily washed.
|
|
Theatre Installation
| |
A
VIEW of the Rivoli auditorium being prepared to show the Todd-AO wide
screen system. It was the first theatre to be fully equipped.
Each theatre installing the Todd-AO process will buy the same basic
Todd-AO projection and sound equipment; the type of projection lenses
used and the dimensions of the screen will vary in most cases due to the
differences in projection throws and auditorium sizes. As a general
rule, the preferred screen is the largest screen that it is possible to
install in the theatre auditorium.
The Motion Picture Products division of the American Optical Company and
the technical staff of the Todd-AO Corporation have studied in detail a
great number of theatres of all sizes and can rapidly determine the most
appropriate screen size, shape, and location for all types of theatres,
after either examining theatre plans or surveying the theatre itself,
thereby insuring the theatre owner of the best audience participation
for his viewing audience.
|
|
Survey Taken
| |
Theatre survey methods have now been
devised so as to make them standard and organized to conduct; a major
theatre can be surveyed in less than one day.
The installation of all necessary projection and sound equipment, as
well as the installation of the screen frame and screen, has been
reduced to a standard procedure and to the minimum amount of time. It is
estimated that a Todd-AO installation can be completed in approximately
two weeks and that this installation time, with more experience and in
smaller theatres can be shortened.
|
|
|
|
Go: back - top -
back issues -
news index Updated
28-07-24 |
|
|